
Check the switchboard first
Before you call anyone, look at your switchboard. If the breaker labelled hot water or cylinder has tripped, switch it back on and give it a few hours. If it holds, you have solved it for free. If it trips again straight away, stop resetting it and call, because something is drawing a fault.
Elements and thermostats carried on the van
Honest answer if the cylinder genuinely is past it

How we get it back on
We work from cheapest cause to dearest, not the other way around.
Rule out the easy stuff
Breaker, isolating switch, and whether the cylinder is actually getting power.
Test the element and thermostat
The two most common failures, and both are same day repairs.
Check the cylinder itself
Age, condition and any signs of leaking tell us whether it is worth repairing.
Repair, or tell you straight
If it needs replacing we will say so, and explain why rather than just quoting.

Why call us
Cold water at the tap has four common causes and only one of them is expensive.
You deal with Mark, every time
The person who answers the phone is the person who quotes the job and turns up to do it. Nothing gets lost between an office and a van, and you are not explaining it twice.
Price agreed before we start
You get a fixed price up front rather than an hourly rate and a surprise at the end. Quotes are free and there is no obligation to go ahead.
Twenty years of cylinders
Most hot water faults are an element or a thermostat rather than a dead cylinder. Knowing the difference is what stops a repair turning into a replacement you did not need.
Hot water
Other work we take on across the Coast and Albany.
What our customers say
Feedback from customers across the Hibiscus Coast and Albany.
FAQs
Got questions? We've answered the most common ones here.
Yes. Emergency work is covered 24/7. Burst pipes, a cylinder letting go and total loss of hot water do not wait for business hours, so neither do we. Non urgent work is booked during normal hours, and we will tell you honestly which one yours is when you call.
For a leak or a burst, turn the water off at the toby and move anything valuable out of the way. For a blocked toilet or waste, stop using water in the house so nothing else adds to it. For a hot water problem, check whether the breaker at the switchboard has tripped, because that costs nothing to reset. Then clear access to the area if you can, and take a few photos before you clean up in case you need them for insurance.
The toby is your mains water shutoff, and it is usually at the front boundary of your property near the footpath, under a small round or rectangular lid marked with a W or the water authority's name. Lift the lid and turn the valve clockwise to shut the water off. It is worth finding yours now, while nothing is wrong, rather than in the dark with water pouring through a ceiling.
Anything where water is escaping and cannot be stopped, where you have lost water entirely, or where a leak is actively damaging the building. Burst pipes, a badly overflowing toilet, a leaking hot water cylinder and a blocked drain backing up into the house are all emergencies. A dripping tap or a slow drain is not, and is better booked as normal work.
Where we work
From Whangaparāoa and Gulf Harbour through Silverdale and Orewa, out to Dairy Flat and down to Albany.
Need a plumber?
Tell us what is going on and we will give you a straight answer on price and timing.















